No Surface Drilling To Fix And Bond Wood Strong Adhesion Nail Free
Junbond® JBN1 is a synthetic rubber adhesive specially formulated for
construction applications. With excellent adhesion capabilities,
the product is ideally suited to most building materials including
concrete, galvanized metals, aluminium, and many different kinds of
Junbond® JBN1 Features:
very high end strength
good adhesion to most common substrates even on slightly wet
permanent elastic after cure
paintable with wate based paints after curing
good colour stability weather and UV resistance
dry storage place at temperatures between +5c and +25c
Density: 1.0 (g / cm3)
Tensile strength: 7.1 (MPa)
Elongation: 4.2 (%)
Shear strength: 4 (MPa)
Curing conditions: curing at room temperature
Curing time: 36 (h)
Water resistance: good
How to use:
Wipe the bonding surface of the object to be bonded clean and keep
Extrude the glue on the bonding surface (the amount of glue depends
on the area of the bonding surface). Open the bonding area several
times to speed up drying. Fast resume initial bonding.
Step 1. Please clean surface before use, cannot exist any oil water
stains, dusts or something dirty.
Step 2. Squeezing glue out, and suggest use it from middle to
outware, avoid bubbles.
Step 3. Please wait 5 minutes to be Located, 20 minutes can be
moving and 30 minutes solidifying completed.
Step 4. Different temperature and Sticky surface decides different
solidifying time, from 30 minutes to 72 hours.
* traceless dismantling
* protect the wall
* repeatedly use
* blow with a hair dryer for 2 minutes to soften the gel
* shake up & down to take down the shelf slowly
* using a blade to cut off excess glue
|Name||Nail free gule|
|Construction length||8m long|
|characteristic||Wide range of uses|
bonding almost all building materials
|Shelf life||Pls check product label|
1- Wood to wood assemble application.
2- Metal joints to lumber, lumber and treated lumber.
3- Prefinished panels.
4- Bathroom fixtures.
5- Fiber glass shower enclosures.
6- Plastic and ceramic.
In winter, due to temperature, the gel curing time will increase,
so the normal gel curing time can prolong the gel aging period, and
the gel bonding strength has been enhanced. It is suggested that
the curing time of colloid should be 72 hours.
Junbom Hui Bei Factory
Package & Delivery
Q1: Are you factory?
A1: Yes, we are factory.
Q2: Can I do an OEM?
A2: Yes,we do the brand, logo as your requirements.
Q3:Why we choose you? What is your strength?
A4:With 30 years experiences in this field, we are a professional supplier of
the well-know customers. Our facilities conform to the standard
audit requirement and our products meet the certification terms
from different countries and areas.
Q4: What other products do you have?
A3: Besides our mainly products silicone sealant, and polyurethane foam, we also have many other products, such as liquid nails,beauty
sealant,glass glue,polyurethane foam cleaner ,foam gun and silicon
Q5:What is your sample policy?
A5: We can supply 2-3 samples for free, but as this is aerosol
products with pressurized gas, it is dangerous goods, we only
supply the Cured sample.And the freight cost need to be prepaid by
Q6: Agent's wanted?
A6: Welcome general agent all over the world.
If you want to know more details information, pls just feel free to
contact us! :)